Model 005-302 Fan Heater. 3,500
BTU @ 180 F 3 GPM Flow
Designed specifically for heating of a small compartment similar to an
Marine head compartment or small stateroom. 3” ducting and air outlet grill can be extended into those tight
locations on a boat.
Built in air vent and standard 3/4” water system connections.
Optional MPT or PEX solder fitting & two speed switch are
available. Complete with heater,
ducting, clamps and air grill.
Height : 4.125”
Width : 6”
Depth : 8” 12 or 24V Models available
Model 005-905FF Fan Heater 8,000 BTU @ 180 F 3 GPM flow
Dual 2.5” air outlets allow heating of two adjacent small staterooms
or stateroom and marine head compartment. The 2.5” flexible
ducting can be extended into and past those small access openings.
The two air flow adjustable air grills allows heating balance at a
touch of the air flow louver. Built in air vent and standard 3/4”
water system connections. Optional MPT or PEX solder fitting & two
speed switch are available. Complete
with heater, ducting, clamps and air grills. FF features allows multiple heater position
for ducting and hose routing.
Height : 5.75”
Width : 7”
Depth : 8.5” 12 or 24V Models available
Model 005-914FF fan Heater 8,000 BTU @ 180F 3 GPM flow
This four inch duct and air grill equipped heater provides quiet
even heat in the sleeping area and other areas. In field air flow
direction change is possible. Remove 4 screws on the front and back reverse the motor and air outlet
and the front will be come the back with air flow in the opposite
direction. No need for 180 degree duct
routing to get the air pointed in the right directions. Built in air vent and
standard 3/4” water system connections. Optional MPT or PEX solder fitting
& two speed switch are available. Complete with heater, ducting, clamp and air grill.
Height : 5.75”
Width : 7”
Depth : 8.5” 12 or 24V Models available
Model 005-919FF fan heater 8,000
BTU @ 180F 3 GPM flow
This heater equipped with three inch duct and air grill will fit into
those location where the four inch ducting cannot fit. Similar equipped as the Models 005-905FF
& 914FF for in-field motor
Air outlet air flow direction. These FF Models can also be rotated
180 degrees so the top becomes the bottom for water hose routing with out
the need for hose cross over. Dual air
vent fittings allow this feature. The Models 905FF,914FF & 919FF are all
equipped with a five pass water coil for superior water flow & heat
output.
Height : 5.75”
Width : 7”
Depth : 8.5” 12 or 24V Models available
Five pass water
coil for 16,500 BTU rating with dual 12V .36A fans. Complete with ducting, duct clamps &
air
outlet grills. Ideal fan heater for large cabin heat utilizing dual outlets for even
heat circulation.
FF models allows
hose routing and connection from either side of the mounting compartment..
12 or 24V Models available
MSR Model 005-941FF
Single 4” air outlet fan heater.
Five pass water
coil for 16,500 BTU rating with dual 12V .36A fans. Complete with ducting, duct clamps &
air
outlet grill. Ideal fan heater for large cabin heat utilizing
space saving single
duct & air outlet grill.
FF models allows
hose routing and connection from either side of the mounting compartment..
12 or 24V Models available
MSR Model 005-909II
cabinet toe space mounting fan heater.
Five pass water
coil for 7,000 BTU rating. Black anodized aluminum cutout cover air
grill. Low profile (3.75”) allows
installation in a cabinets toe space Or other low profile
location. Ideal heater for galley space Installation
for “Warm Feet” for the first mate for morning coffee or meal
preparation. Heater can also be mounted vertical in
those narrow unused space on some cabinets.
12 or 24V Models available
MSR Model
005-942-C Combination windshield
defrost with four 2” outlets and single 4” outlet for helm station heat from
one fan heater. High capacity squirrel
cage 3 speed motor for high air
movement for windshield defrost and single quiet low amperage fan for helm station heat from one heater.
Heater is equipped
with ducting, 2 & 3 speed switch and air
Outlet grills.
12 or 24V Models available
All Heaters complete with ducting & clamps & Air grills
Optional equipment
all fan heaters: